Bambu Lab US


Glass Fiber Reinforced ABS

$29.99 USD

Product Features
  • Enhanced Strength and Stiffness
  • Greater Dimensional Stability
  • Fine Matte Finish
  • Durability and Water Resistance
  • Comes with High Temperature Reusable Spool
  • Diameter: 1.75 mm +/- 0.03 mm

Cautions for Use
  • 0.2 mm Nozzle Not Compatible
  • Enclosure Printers Required
  • AMS & AMS lite Compatible
  • Dry Out Before Use

Note: Before printing, please kindly refer to the Printing Tips for optimal results.

Color: Orange (41300)
Order now:
$29.99 USD

Order Info
  • Free shipping on orders over $49
  • Free shipping on orders over $199 to remote areas including Alaska, Hawaii, Puerto Rico, and Guam

Bambu ABS-GF

Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.

PLA Aero PLA Aero

Enhanced Strength and Stiffness

ABS-GF outclasses regular ABS in strength and stiffness, making it perfect for load-bearing and bending-resistance parts.

图片加载失败文案 图片加载失败文案
图片加载失败文案 图片加载失败文案
图片加载失败文案 图片加载失败文案
Improvement %
Stiffness (Bending Modulus - XY) 1880 MPa
2860 MPa
Strength (Bending Strength - XY) 64 MPa
68 MPa
Layer Strength (Bending Strength - Z) 39 MPa
46 MPa
Heat Resistance (HDT, 0.45 MPa) 87 °C
99 °C

Greater Dimensional Stability

Glass fiber reinforcement gives ABS-GF better dimensional stability than regular ABS, minimizing warping and deformation during printing. This makes it ideal for intricate mechanical assembly parts or geometric components.

filament filament
filament filament

Specimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25%

filament filament

Fine Matte Finish

The seamless matte finish, coupled with nearly invisible layer lines, gives ABS-GF a smooth appearance, making it ideal for decorative and fine-grained parts.

PLA Aero PLA Aero
filament filament
filament filament

Water Resistance & Built to Last

With improved water resistance and durability, Bambu ABS-GF is ideal for printing long-lasting production and household items, like mechanical casings, connectors and molds.

filament filament
filament filament

Accessory Compatibility

Recommended Not Recommended
Build Plate Engineering Plate, High Temperature Plate or Textured PEI Plate Cool Plate
Hotend Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm Hotend with Stainless Steel Nozzle (all size)
Hotend with Hardened Steel Nozzle (0.2 mm)
Glue Bambu Liquid Glue
Glue Stick

ABS-GF Hex Code Table

Color Hex Code Display
White #FFFFF
Gray #C6C6C6
Yellow #FFE133
Orange #F48438
Red #E83100
Green #61BF36
Blue #0C3B95
Black #000000

Parameters Comparison

Learn more different filaments comparison on Bambu Filament Guide >>

Composition Acrylonitrile - butadiene - styrene
Acrylonitrile - butadiene - styrene,
glass fiber
PA6, glass fiber
AMS Compatibility YES
Dry Out Before Use Recommended
Printing Speed < 300 mm/s
< 180 mm/s
< 130 mm/s
Printer Type Enclosure
Toughness (Impact Strength - XY) 39.3 kJ/m²
14.5 kJ/m²
27.2 kJ/m²
Strength (Bending Strength - XY) 62 MPa
68 MPa
120 MPa
Layer Strength (Bending Strength - Z) 39 MPa
46 MPa
51 MPa
Stiffness (Bending Modulus - XY) 1880 MPa
2860 MPa
3670 MPa
Layer Adhesion (Impact Strength - Z) 7.4 kJ/m²
5.3 kJ/m²
4.1 kJ/m²
Heat Resistance(HDT, 0.45 MPa) 87 °C
99 °C
182 °C
Saturated Water Absorption Rate/%(25 °C, 55% RH) 0.65

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

rfid rfid

Recommended Printing Settings
Drying Settings (Blast Drying Oven) 80 °C, 8 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 240 - 270 °C
Bed Temperature (with Glue) 80 - 100 °C
Printing Speed < 180 mm/s
Physical Properties
Density 1.08 g/cm³
Vicat Softening Temperature 103 °C
Heat Deflection Temperature 99 °C
Melting Temperature 202 °C
Melt Index 7.56 ± 1.4 g/10 min
Mechanical Properties
Tensile Strength 36 ± 3 MPa
Breaking Elongation Rate 6.3% ± 1.2%
Bending Modulus 2860 ± 130 MPa
Bending Strength 68 ± 4 MPa
Impact Strength 14.5 ± 1.5 kJ/m²

Printing Tips

• Drying conditions: 80℃ for 8 hrs. Dry the filament before printing to achieve higher print quality.

• To minimize warping, avoid printing large-sized high infill density models. Use enclosed printers and ensure the build plate is properly applied with glue for better print adhesion before printing. Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.

• Similar to ABS, pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area and use enclosed printers.

What's in the Box?

Filament with Spool*1 & Desiccant*1

Filament Label*1

图片加载失败文案 图片加载失败文案