Carbon Fiber Reinforced PLA

$34.99 USD

✔ Dry out before use
✔ AMS compatible
Color: Black
Shipped from USA warehouse
● Free shipping on orders over $49
● Free shipping on orders over $199 to remote areas including Alaska, Hawaii, Puerto Rico, and Guam
● Free shipping excluding printers and AMS
14-Day Refund Service, 30-Day Replacement Service
● You may cancel order within two hours of submitting your order. For complete details, read our ORDER CANCELLATION

Bambu PLA-CF

Bambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineering parts or models requiring a better appearance, like bike frames, brackets and toys.


Carbon fiber texture & Minimized layer lines

The addition of carbon fiber gives prints a unique matte finish and effectively hides layer lines, providing a smooth, premium look.


图片加载失败文案 图片加载失败文案
图片加载失败文案 图片加载失败文案

Improved mechanical properties

Bambu PLA-CF exceeds the mechanical properties of PLA Matte in XY Bending Strength, Z Bending Strength, XY Bending Modulus, Z Bending Modulus, XY Impact Strength, and Z Impact Strength by between 20% and 115%, making it more suitable for printing models with higher strength requirements.

pla cf图片加载失败文案 

Mechanical Properties Comparison

PLA Matte PLA-CF Improved %
Tensile Strength - XY/MPa 32 53 66%
Tensile Strength - Z/MPa 25 36 44%
Bending Strength - XY/MPa 53 114 115%
Bending Strength - Z/MPa 32 68 112%
Bending Modulus - XY/MPa 2360 3700 57%
Bending Modulus - Z/MPa 2040 2600 27%
Impact Strength - XY/(kJ/m²) 19.2 23 20%
Impact Strength - Z/(kJ/m²) 6.6 8.9 35%

*Drying PLA is recommended for humid environments at 55 °C for 8 hours before printing.


Not prone to clogging in high-speed printing

Bambu PLA-CF is just as easy to print as regular PLA. It can be printed smoothly and consistently at high speed without clogging.

pla cf pla cf

Minimal effort in support removal

Bambu PLA-CF is designed to support itself. It can be removed more easily compared to regular PLA, and still maintains a smooth support surface.

pla cf pla cf


RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

图片加载失败文案 图片加载失败文案
Recommended Printing Settings
Drying Settings before Printing 55 °C, 8 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 210 - 240 °C
Bed Temperature (with PVP Glue) 35 - 45 °C
Printing Speed < 200 mm/s
Physical Properties
Density 1.22 g/cm³
Vicat Softening Temperature 69 °C
Heat Deflection Temperature 55 °C
Melting Temperature 165 °C
Melt Index 3.7 ± 0.6 g/10 min
Mechanical Properties
Tensile Strength 38 ± 4 MPa
Breaking Elongation Rate 12.7 ± 3.4 %
Bending Modulus 3700 ± 220 MPa
Bending Strength 96 ± 3 MPa
Impact Strength 23.2 ± 3.7 kJ/m²

Printing Tips

• Drying PLA-CF is optional, but recommended for humid environments at 50℃ for 8 hours before printing.


What's in the Box:

图片加载失败文案 图片加载失败文案

Filament with Spool*1 & Desiccant*1

图片加载失败文案 图片加载失败文案

Filament Label*1

图片加载失败文案 图片加载失败文案




Displayed models:

African Animals Low Poly @STLFLIX

Phone Holder @Turbo_SunShine

Twisted 6-sided Vase Basic @MaakMijnIdee

Fractal Pyramid with Continuous Cross-section @ricktu

Unicorn @YahooJAPAN Honeycomb

Phone Stands @Adam3579