The soft transition between two colors creates a vibrant and stunning visual effect on printed models.
Gradient colors make it ideal for printing pretty toys or decorations.
Up to 300mm/s (with 0.4mm nozzle) printing speed while maintaining delicate and refined finish.
Smaller models with less filament consumption will have a less noticeable gradient looks, while larger models with more filament consumption comes with a noticeable gradient looks.
As new color options in the PLA Basic series, the gradient filament retains similar performance to PLA Basic while providing even stronger layer adhesion and toughness, reducing the risk of printed parts breaking.
| Layer Adhesion (Impact Strength - Z) | Improved % | |
| Normal Matte PLA | 6.6 kJ/m² | 261% |
| Bambu PLA Basic Gradient | 23.8 kJ/m² | |
| Specimens：20*2*80 mm³ | ||
| Recommended | Not Recommended | |
| Build Plate | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate | / |
| Hotend | All Size / Material | / |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
| Color | Hex Code | Display |
| Arctic Whisper | #9CDBD9; #FFFFF | |
| Solar Breeze | #E94B3C; #FFFFFF | |
| Ocean to Meadow | #307FE2; #54FF9B |
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 55 °C，8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 - 230 °C |
| Bed Temperature (with Glue) | 35 - 45 °C |
| Printing Speed | < 300 mm/s |
| Physical Properties | |
| Density | 1.24 g/cm³ |
| Vicat Softening Temperature | 57 °C |
| Heat Deflection Temperature | 57 °C |
| Melting Temperature | 160 °C |
| Melt Index | 42.4 ± 3.5 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 36 ± 2 MPa |
| Breaking Elongation Rate | 15.2 ± 0.5 % |
| Bending Modulus | 2270 ± 60 MPa |
| Bending Strength | 73 ± 3 MPa |
| Impact Strength | 61.2 ± 2.8 kJ/m² |
• PLA Basic Gradient is a new color options of PLA Basic series, please use the default PLA Basic setting for printing. To obtain higher printing quality, please set lower printing speed (layers speed and acceleration).
• Drying PLA Basic Gradient is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed. Learn more about filament drying. Please refer to Filament drying cover on WIKI.
• Gradient Length: 8 ~ 10 meters
Filament with Spool*1 & Desiccant*1
Package*1
