Name: ABS
Brand: Bambu Lab
SKU: B00-G6-1.75-1000-SPLFREE
Price: 22.99 USD
Availability: OutOfStock

ABS Hex Code Table

Color	Hex Code	Display
Beige	#DFD1A7
Lavender	#7248BD
Olive	#789D4A
Tangerine Yellow	#FFC72C
Azure	#489FDF
Navy Blue	#0C2340
White	#FFFFFF
Silver	#87909A
Red	#D32941
Orange	#FF6A13
Yellow	#FCE900
Mint	#7AE1BF
Bambu Green	#00AE42
Blue	#0A2CA5
Purple	#AF1685
Black	#000000

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	80 °C，8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed，with Desiccant)
Nozzle Temperature	240 - 270 °C
Bed Temperature (with Glue)	80 - 100 °C
Printing Speed	< 300 mm/s

Physical Properties
Density	1.05 g/cm³
Vicat Softening Temperature	94 °C
Heat Deflection Temperature	87 °C
Melting Temperature	200 °C
Melt Index	34.2 ± 3.8 g/10 min

Mechanical Properties
Tensile Strength	33 ± 3 MPa
Breaking Elongation Rate	10.5 ± 1.0 %
Bending Modulus	1880 ± 110 MPa
Bending Strength	62 ± 4 MPa
Impact Strength	39 ± 3.6 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

• Pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area.

• Drying conditions: 80℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

• ABS is prone to warping when printing large size and/or high infill density model. To avoid warping: 1) Not recommemded to print too large size and/or high infill density model. 2) Use enclosure printers and ensure the build plate is properly glued before printing. 3) Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.

What's in the Box

Filament with Spool*1 & Desiccant*1

Package*1

Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

2.If you don't have the spool model in your printer,

please click here to download.

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.

	Recommended	Not Recommended
Build Plate	Engineering Plate, High Temperature Plate or Textured PEI Plate	Cool Plate
Hotend	All Size / Material	/
Glue	Bambu Liquid Glue Glue Stick	/

ABS

Bambu ABS

Strong & Durable

Impressive Heat Resistance

Water-Resistant

Tough with High Impact Resistance

Accessory Compatibility