- Free shipping on orders over $89 (excludes Printers, AMS, and Smoke Purifier).
- Free shipping on orders over $199 to remote areas including Alaska, Hawaii, Puerto Rico, Guam, Northern Mariana Islands and American Samoa (excludes Printers, AMS, and Smoke Purifier). See our Shipping Policy for details.
Real High Flow: Save Up to 30% of Your Time
The Bambu High Flow Nozzle's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you save—especially for prints with extensive infills.
1. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280℃ nozzle temperature, spiral vase mode on.
2. Tested with PLA Basic, 15% infill, 300x300x300mm cube.
| PLA Basic | PLA Matte | PETG HF | Max Volumetric Speed | |
| Bambu Hardened Steel Nozzle (0.4mm) | 24 mm³/s |
28 mm³/s
|
24 mm³/s
|
40 mm³/s
|
| Bambu High Flow Nozzle (0.4mm) | 40 mm³/s | 48 mm³/s | 32 mm³/s | 65 mm³/s |
High-Speed Precision: Sharp Details Every Time
Say goodbye to under-extrusion, rough surfaces, and loss of detail. Unlike standard high-flow nozzles, Bambu's high yet consistent extrusion ensures crisp edges, flawless texturing, and ultra-smooth surfaces—every single time.
Upgrade now and print faster without compromise!
Printer Compatability
| H2D | X1/P1 Series | A1 Series |
| Supported | Not Supported |
Supported*
|
*Bambu High Flow Nozzle is compatible with A1 Series, but it will not improve volumetric speed. In other words, the High Flow Nozzle performs the same as a standard nozzle on the A1 Series.
Filament Compatibility
| Filament | 0.2 mm Stainless Steel |
0.4 mm Hardened Steel |
0.6 mm Hardened Steel |
0.8 mm Hardened Steel |
0.4 mm High Flow
Hardened Steel |
| PLA Basic | √ | √ | √ | √ | √ |
| PLA Matte | √ | √ | √ | √ | √ |
| PLA Basic Gradient | √ | √ | √ | √ | √ |
| PLA Silk+ | √ | √ | Not recommended | Not recommended | √ |
| PLA Silk Dual Color | √ | √ | Not recommended | Not recommended | √ |
| PLA Silk | √ | √ | Not recommended | Not recommended | √ |
| PLA Metal | √ | √ | √ | √ | √ |
| PLA Marble | Not recommended | √ | √ | √ | √ |
| PLA Sparkle | Not recommended | √ | √ | √ | √ |
| PLA Wood | Not recommended | √ | √ | √ | √ |
| PLA Galaxy | Not recommended | √ | √ | √ | √ |
| PLA Glow | X | √ | √ | √ | √ |
| PLA-CF | X | √ | √ | √ | √ |
| PLA Aero | X | √ | Not recommended | Not recommended | √ |
| PETG HF | √ | √ | √ | √ | √ |
| PETG Translucent | Not recommended | √ | √ | √ | √ |
| PETG-CF | X | √ | √ | √ | √ |
| ABS | √ | √ | √ | √ | √ |
| ABS-GF | X | √ | √ | √ | √ |
| ASA | √ | √ | √ | √ | √ |
| ASA Aero | X | √ | Not recommended | Not recommended | √ |
| ASA-CF | X | √ | √ | √ | √ |
| PC | √ | √ | √ | √ | √ |
| PC FR | √ | √ | √ | √ | √ |
| TPU for AMS | X | √ | √ | √ | √ |
| TPU 95A HF | X | √ | √ | √ | √ |
| TPU 85A | X | X | √ | √ | X |
| TPU 90A | X | √ | √ | √ | X |
| PAHT-CF | X | √ | √ | √ | √ |
| PET-CF | X | √ | √ | √ | √(Only for Left Hotend) |
| PA6-CF | X | √ | √ | √ | √ |
| PPA-CF | X | √ | √ | √ | √(Only for Left Hotend) |
| PPS-CF | X | √ | √ | √ | √(Only for Left Hotend) |
| Support for ABS | X | √ | √ | √ | √ |
| Support for PLA/PETG | √ | √ | √ | √ | √ |
| Support for PA/PET | X | √ | √ | √ | √ |
| Support for PLA (New Version) | √ | √ | √ | √ | √ |
| PVA | √ | √ | √ | √ | √ |
| PA6-GF | X | √ | √ | √ | √ |
[Note]
- Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
- For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
- Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.
Quick Swap Nozzle Design
*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.
*Learn more about replacing the Hotend on Bambu Lab Wiki
In the Box
| High Flow Hotend |
| High Flow Hotend with hardened steel nozzle - 0.4 mm * 1 |
Product Specifications
| Max. Printing Temp. | 350 ℃ | Length | 49.2 mm |
| Packaging Weight | 0.028 kg | Packaging Size | 60*60*30mm |